|
Choose a Spec Lift model from the options below...
Spec Body
- 6/7 door deluxe locker body system
- stainless steel door locks and hinges
- stainless steel door opening & antichip edging
- lift up doors fitted with gas struts and open to vertical
- 12V jump sockets fitted front and rear
- 6 No recessed tool locker lights
- 60'' recovery light bar to flyer
- flyer mounted stop, tail & indicator lights
- flyer mounted work lights
- rear low mounted spec loading lights
- full plastic wheel arches
- rear deckings fitted with 5 bar alloy chequer plate
- paintwork finished in 2 pack paint
Lift
- 2500KG swan neck spec lift rated to suit vehicle size
- 10 MM pressed steel main lift sections
- twin 70 MM bore lift rams with hard chromed stainless steel rods
- single 100 MM bore kick ram with hard chromed stainless steel rod
- single 50 MM bore beam extension ram with hard chromed stainless steel rod
- primary hydraulic load check valves fitted to main lift and kick rams
- 8000lb ramsey hydralic winch with radio remote control
- gearbox mounted hydraulic pump with air actuation
- 4 bank spool valve fitted with a radio remote to winch control
- 2 year structural warranty
- 1 year mechanical warranty
Spec Body
- 6/7 door deluxe locker body system
- stainless steel door locks and hinges
- stainless steel door opening & antichip edging
- lift up doors fitted with gas struts and open to vertical
- 12V jump sockets fitted front and rear
- 6 No recessed tool locker lights
- 60'' recovery light bar to flyer
- flyer mounted stop, tail & indicator lights
- flyer mounted work lights
- rear low mounted spec loading lights
- full plastic wheel arches
- rear deckings fitted with 5 bar alloy chequer plate
- paintwork finished in 2 pack paint
Lift
- 3500KG swan neck spec lift rated to suit vehicle size
- 10 MM pressed steel main lift sections
- twin 70 MM bore lift rams with hard chromed stainless steel rods
- single 100 MM bore kick ram with hard chromed stainless steel rod
- single 50 MM bore beam extension ram with hard chromed stainless steel rod
- primary hydraulic load check valves fitted to main lift and kick rams
- 8000lb ramsey hydralic winch with radio remote control
- gearbox mounted hydraulic pump with air actuation
- 4 bank spool valve fitted with a radio remote to winch control
- 2 year structural warranty
- 1 year mechanical warranty
Stainless Steel Bodywork
Dave Bland engineering are currently supplying their new stainless steel locker body system, an exciting concept developed during a year of research into the use of high quality stainless steel sections and comparisons with coated carbon steels and other materials which have poor corrosive resistance.
The results have produced a far superior alternative, a lighter, stronger body more resistant to corrosion it's durable, maintenance is low and it provides long service, helping to meet the demands placed on todays modern Recovery Operator.
For this application Dave Bland has chosen a product which is recognised as the original and the world's most specified utility stainless steel. It provides benefits such as good weldability and formability, making it capable of fabrication by conventional techniques. Atmospheric corrosion testing has given corrosion rates as low as 0.001-0.002mm/year (0.00004"-0.00008"/year) in modern marine environments, an improvment of 250 times the life of unpainted mild steel under the same conditions. The design advantages offer by this stainless steel are superior strength over mild steel such as BSEN 10113 Grade Fe430A (AISI 1018 or ASTM A36) an equal level of stiffness, superior corrosion resistance, enhanced resisitance to wet abrasion plus its ability over a wider temperature range.
In summary Dave Bland's Stainless Steel Locker Body system can offer the following benefits to you, the operator:
- Outstanding corrosion resistance
- 250 times greater corrosion resistance than mild steel
- Offers high strength and low weight design options
- Durability and long service
- Finish painted in 2 paint packs
|
